Description

Value of the product:

• Ideal for facade painting
• Weather-resistant, high water resistance
• Vapour-permeable
• Efficient
• Easy to apply. Fast drying
• For exterior and interior use

Recommended uses::
Used for exterior and interior painting walls on concrete, plastered, brick, cement-lime and other porous surfaces. Living, industrial premises, medical facilities, pre-school institutions, secondary schools, higher education establishments, food industry factories.
Figures according to DSTU ЕN 13300:

• Glossiness: matte (G3 class)
• Vapour permeability: medium (V2)

Application guidelines:
Surface preparation:

• The surface to be painted should be dry, degreased and free of dust
• Before painting, remove old layers of glue and lime paints as well as old peeling coatings
• To level surface roughness, TRIORA putties should be used
• To improve adhesion, reduce paint consumption, strengthen the surface, apply appropriate TRIORA primer on the surface before painting
• Highly absorptive and porous surfaces should be primed with TRIORA Deep Penetration Primer. Attention! Wallpapers must not be primed before painting
• If there is mould or fungi on the surface, use TRIORA Bioprotective Agent to remove them

Dilution:
If necessary, dilute with water for working viscosity (not more than 5%)

Important! Wet paint must be protected from precipitation within 24 hours

Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.