Description

Value of the product:

• Ideal for ceilings
• High whiteness
• Velvety surface texture

Recommendeduses:
For interior painting of cement, cement-lime, plastered, concrete and drywall walls and ceilings that are not subject to load and do not require washing.
Figures according to DSTU ЕN 13300:

• Glossiness: deep matte
• Wet abrasion resistance: Class V
• Contrast ratio: Class 2 at 7 m²/L

Applicationguidelines:
Surfacepreparation:

• The surface to be painted should be dry, degreased and free of dust
• Before painting, remove old layers of glue and lime paints, as well as old peeling coatings
• To level surface roughness, TRIORA putties should be used
• To improve adhesion, reduce paint consumption, strengthen the surface, apply appropriate TRIORA primer on the surface before painting
• Highly absorptive and porous surfaces should be primed with TRIORA Deep Penetration Primer
• Attention! Wallpapers must not be primed before painting
• If there is mould or fungi on the surface, use TRIORA Bioprotective Agent to remove them

Dilution:
If necessary, dilute with water for working viscosity (not more than 5 %)

Application guidelines: 

• Thoroughly stir the paint before applying
• Apply the paint with a brush, roller or by spraying at temperature +5 °С and above
• Apply 1-2 paint layers
• The second layer is to be applied after the first one has dried

Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.