Additional information
Drying time | |
---|---|
Consumption of the product | |
Thinner | |
Type of works | |
Containers | |
Camer's size |
Drying time | |
---|---|
Consumption of the product | |
Thinner | |
Type of works | |
Containers | |
Camer's size |
The value of the product:
Recommended uses:
Using for the protection and decoration of the surfaces with a high operational load outside and indoors. The product could be used as a finishing layer in a thermal insulation system, which are using expanded polystyrene boards. Forms a characteristic furrowed surface, creating the “bark beetle” effect
The mode of application:
Surface preparation:
NECESSARILY: before the product applying use Quartz adhesive primer for putty TM TRIORA, tinted in the same tone with the plaster
Application:
Important! Freshly applied plaster should be protected from the rain for 24 hours
Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.
Анастасия –
Качество порадовало, наносится очень легко.
Светлана Никитенко –
Делает очень интересный эффект и хорошо смотрится в помещении. А больше всего радует что не будет пачкаться стена теперь. А то с детворой только успеваю мыть)
Максим Шевчук –
Легко наносить. Просто шпателем размазываешь по стенке – и получается рисунок. Если стены в доме неровные – хороший вариант.