Close

Интерьерные и фасадные краски TRIORA

Phone 0-(800)-50-18-31
Off triora
Show filter and search
Калькулятор
  • Хочу рассчитать площадь
  • Знаю площадь
Закрашиваемая область
Ширина
м
Высота
м
Не закрашиваемая область
Ширина
м
Высота
м
м2
Итого: 0

Adhesion primer “BETON KONTAKT” TRIORA

Category:


Buy here:
Rozetka.UA

Additional information

Stages

,

Containers

, ,

Coverage

Thinner

Type of works

,

Drying time

Description

Safety Data Sheet – Adhesion Primer BETON KONTAKT TM TRIORA

Product Value:

  • Increases coating adhesion to the surface

  • Suitable for exterior and interior use

  • Resistant to alkaline compounds

  • Contains marble filler

Purpose:
For exterior and interior applications. Designed for treating mineral surfaces such as:

  • Monolithic concrete and precast concrete elements

  • Glazed ceramic tiles

  • Glass surfaces

  • Surfaces painted with alkyd paints

  • Metal embedded parts

Used to create an intermediate layer before applying:

  • Plasters (gypsum, gypsum-lime, lime-cement)

  • Tile adhesives

  • Decorative and construction mortars

A distinctive feature of this primer is the inclusion of a pink pigment, which simplifies uniform application on the substrate.

Application Instructions

Surface Preparation:

  • Surface must be solid, dry, degreased, and cleaned from dirt, dust, efflorescence, oil stains, and other substances that reduce adhesion.

  • Remove old weak bases and flaking areas mechanically.

  • If mold or fungi are present, clean mechanically and treat with TRIORA Bio-protective agent.

  • Loose areas should be treated with TRIORA acrylic primers according to label recommendations.

  • Glossy surfaces are recommended to be sanded to a matte finish.

Application Method:

  • Stir thoroughly before use and periodically during application.

  • Apply undiluted. For machine application, dilution with water up to 5% is allowed.

  • One layer is sufficient, but maximum adhesion properties are achieved with two layers.

  • Apply the second layer after the first layer is fully dry.

Important: Decorative materials (paints, plasters, putties, etc.) should only be applied after the adhesion primer has dried, but not earlier than 4 hours.

Precautions, Storage, and Disposal:

  • Keep out of reach of children.

  • In case of contact with eyes, rinse immediately with clean water.

  • Protect from frost.

  • Store in a dry, cool place at temperatures from +5 °C to +35 °C, protected from direct sunlight.

  • Dispose of leftover product in organized household waste collection points.

Safety Data Sheet: Adhesion Primer BETON KONTAKT TM TRIORA

Reviews

There are no reviews yet.

Be the first to review “Adhesion primer “BETON KONTAKT” TRIORA”

Your email address will not be published. Required fields are marked *