Description

Value of the product:

• Protects from weather impact and UV-rays
• Has “anti-blocking” effect — painted surfaces do not stick together
• Fast drying
• Can be used in premises with high humidity
• Does not turn yellow

Recommended Uses:
For interior and exterior decorative finishing of wooden and mineral surfaces (concrete, brick, plaster)

Application guidelines:
Surface preparation:

• Before applying, remove old coating, clean from dust, dirt and mould, then degrease
• To extend operational life of the coating, it is recommended to impregnate unpainted wood with TRIORA «Nature Base» Wood-protective Primer before applying the glaze

Dilution:
If necessary, dilute with water for working viscosity, but no more than 5 mass percent of water

Application guidelines: 

• Thoroughly stir before applying
• Apply the paint with a brush or by spraying at temperature +10°С and above
• Apply 1-3 layers. Applying the next lacquer layer and polishing can be performed in 2-4 hours

Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.