Description

High-Hiding Paint — features outstanding opacity and a bright white color. May cover the surface in one coat (applicable to a uniform, non-contrasting surface with even absorbency). Thixotropic — does not splatter. Applies in a smooth, even layer and visually minimizes minor surface imperfections. Has a neutral odor and contains no solvents. Offers high adhesion to surfaces.

The resulting coating is smooth with a matte finish. Vapor permeable — does not disrupt the natural indoor microclimate. Resistant to repeated washing.

Manufactured in white as well as in TR base, allowing tinting at TRIORA Color Studios to any desired color. The white paint can be tinted into selected pastel and light shades according to TRIORA color charts. The painted surface achieves its final color after the paint has completely dried.

Product Benefits

• Superior hiding power

• High scrub resistance

• Matte finish

• Bright white color

Intended Use

Designed for initial and maintenance protective-decorative painting of interior surfaces, including concrete, plastered, cement-lime, asbestos cement, brick, drywall, and other porous substrates.

Suitable for painting fiberboard and particleboard indoors (except in high-humidity areas such as bathrooms, basements, saunas, etc.).

Application Instructions

Surface Preparation

The surface must be dry, clean, degreased, and free from dust.

Remove flaking paint mechanically.

Completely clean surfaces previously coated with chalk, glue-based, lime, or silicone-based paints. Glossy surfaces should be sanded to a matte finish.

If mold or mildew is present, mechanically remove it and treat the surface with TRIORA “TR-25” Bio Protection Agent or TRIORA Antiseptic for Wooden Surfaces.

To level surface defects greater than 1 mm or drywall joints, use TRIORA “TR-12 Power” Moisture-Resistant Putty.

For proper preparation of mineral surfaces, prime with TRIORA Deep Penetrating Strengthening Primer according to label instructions.

Surfaces finished with gypsum-based putties should be primed with paint diluted with 25% water.

For one-coat application, the surface must be uniform, non-contrasting in color, and have even absorbency.

Application

Stir thoroughly before use. Apply undiluted.

The finishing coat may be diluted with water to working viscosity, but not more than 5%. In most renovation cases, one rich, undiluted coat is sufficient. Maximum protective properties are achieved with two coats.

When painting over contrasting surfaces, apply the first coat diluted with 10–15% water. Apply the second coat after the first has completely dried.

Tools

Apply with a brush, roller, or spray gun at temperatures not lower than +10°C.

Storage and Safety

Store and transport in tightly sealed original packaging at temperatures between +5°C and +35°C. Protect from heat and direct sunlight. Protect from freezing. Keep out of reach of children. In case of eye contact, rinse immediately with clean water. Dispose of sealed containers with product residues at designated household waste collection points.

Safety Data Sheet: “MEGA COVER” High-Hiding Latex Paint, TRIORA Brand