Description

Safety Data Sheet – “INTERIOR VARNISH” Varnish TM TRIORA

Product Value:

• Water-resistant, enhanced with wax

• Odorless

• Highlights the wood texture

• Fast-drying

• Semi-matte finish

• For interior use

Purpose:
For varnishing:

• Wooden surfaces: walls and ceiling panels, beams, block-house, clapboard, particleboard (DSP), fiberboard (DVP), MDF, OSB, cork, and similar materials

• Mineral surfaces: plastered, stone, concrete, brick, etc.

Not suitable for floors, saunas, or surfaces exposed to heavy mechanical stress. Resistant to repeated wet cleaning using neutral, non-abrasive cleaning agents. Exhibits good adhesion to the surface.

Application Instructions

Surface Preparation:

• New surfaces: Must be clean, dust-free, degreased, dry, and solid. Wood moisture content should not exceed 20%. For a perfectly smooth wood surface, prime, dry, and sand the wood.

• Previously varnished surfaces: Remove old or flaking varnish, sand to a matte finish, and clean from dust and dirt.

Application Method:

• Stir thoroughly before use.

• Wooden surfaces should be primed with TRIORA wood-protective primer.

• For highly absorbent surfaces, the primer layer can be applied using varnish diluted with water (no more than 5%).

• After priming and before applying the finish coat, sand the wood. End grains should be treated particularly carefully.

• Application temperature: not below +10 °C for both the surface and ambient environment; relative humidity should not exceed 70%.

Precautions, Storage, and Disposal:

• Keep out of reach of children.

• In case of contact with eyes, rinse immediately with clean water.

• Protect from frost.

• Store in a dry, cool place at temperatures between +5 °C and +35 °C, protected from direct sunlight.

• Dispose of leftover product in organized household waste collection points.

Safety Data Sheet: “INTERIOR VARNISH” Varnish TM TRIORA