Description

Value of the product:

• Protects the surface from blue stain, mould and rot
• Slows down moisture penetration
• Penetrates deeply into wood texture
• Fast drying

Recommended uses:
Used for preliminary treatment of wooden walls, doors, fences, both treated with antiseptic and those not treated, preliminary treatment of log wood, sawn wood, as well as the wood impregnated by pressure, before applying lacquer, glaze or paint to protect the surface from rot, blue stain and mould

Application guidelines:
Surface preparation:

• The surface should be clean from dust, mould and foreign substances
• The treated surface must be dry, with less than 20% wood humidity

Dilution:
No dilution needed. May be diluted with water if necessary, but not more 10%

Application guidelines:

• Thoroughly stir before applying
• Use a brush to apply the 1^st
• Board end faces must be treated extremely carefully
• To enhance protection against blue stain, rot and mould, it is recommended to apply two layers of the primer on an unprocessed surface
• Apply with a brush or by spraying at temperature +10 °С and above

Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.