Description

Value of the product:

• Ideal for finishing levelling of walls
• Perfectly white
• Easy to apply, easy to polish
• Can be applied by airless spraying
• For interior use

Recommended uses:
For interior levelling of minor roughness and defects on plastered, concrete, drywall surfaces

Composition:
Suspension of fillers and auxiliary materials in water-based acrylic dispersion

Application guidelines:
Surface preparation:

• Remove old peeling coating before work
• The surface to be treated should be dry, degreased and free of dust
• To improve adhesion to the surface and to strengthen fragile and highly absorptive surfaces, treat the surface with appropriate TRIORA primer before puttying
• If there is mould or fungi on the surface, use TRIORA Bioprotective Agent to remove them
• Big roughness and fractures should be levelled with TRIORA Facade Putty

Dilution: No dilution needed

Application guidelines: 

• The putty is to be applied with a putty knife or a sprayer with up to 0,3-0,5 mm layer thickness
• Before final finishing, the puttied surface must be polished with fine sandpaper

ATTENTION! Not to be used on surfaces which are under continuous exposure of water, in places with increased humidity. In these cases, TRIORA Facade Putty is recommended

Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.