Description

Acrylic Putty TRIORA is designed to eliminate minor defects and create a smooth surface for further finishing works. It is ideal for treating small areas of walls or ceilings without large holes. The material is ready to use, easy and quick to apply – perfect for beginners and time-saving for experienced professionals. Acrylic putty can be purchased at the TRIORA store at the best value price.

Product Value:

• For interior use

• Layer thickness up to 3 mm

• Easy to apply and sand

• Crack-resistant

Purpose:

For partial and full-surface puttying to level minor irregularities and defects up to 3 mm before applying finishing coatings indoors (painting, decorative plasters, wallpapering, etc.).

Do not use in areas with high humidity or where the surface is under constant exposure to water.

Instructions for Use

Surface Preparation:

• Surface must be clean, dry, solid, and degreased.

• Surfaces previously coated with chalk, glue, lime, or silicate paints must be completely cleaned of old coatings.

• Remove mold or fungi using TRIORA BIO-protective agent.

• For proper preparation, prime the surface with TRIORA Universal Acrylic Primer or Primer Concentrate 1:5 TM TRIORA.

• Highly absorbent surfaces (aerated concrete, gypsum) and loose surfaces should be primed with TRIORA Deep Penetration Strengthening Primer.

Application:

• Stir thoroughly before use.

• Ready for use.

• Apply with a spatula or spray equipment in layers up to 3 mm thick.

• Before final finishing, sand the puttied surface with fine sandpaper and apply one coat of primer to remove dust and improve adhesion of the next material.

Precautions, Storage, and Disposal:

• Keep out of reach of children.

• In case of contact with eyes, rinse immediately with clean water.

• Protect from frost.

• Store in a dry, cool place at temperatures between +5 °C and +35 °C, protected from direct sunlight.

• Dispose of leftover product in organized household waste collection points.

Safety Data Sheet: Universal Acrylic Putty TM TRIORA