Putty for walls is created to improve them, to make an even and high-quality coating for the following materials. If you apply putty, you make quality repair. Is it earnestly? – Yes! However, not everything is so simple. To get a perfect result, you need to choose the right materials. Let’s see what needs to be taken into account and what it is better not to do.
There is a putty for each occasion
The material for puttying must be chosen taking into account the specificity of the walls. What defects on the wall you need to eliminate? Answer this question and you will understand what putty by TRIORA is it better to buy.
What should I pay attention for?
Number and scale of irregularities, cracks, holes.
- Are flaws big? Hence, you have to apply putty in a thick layer, hiding all the shortcomings. In this case, the facade putty by TRIORA is your choice. Its price is higher than the price of loose facade putties, but it also provides the best effect. What is special about it? Facade putty by TRIORA is an acrylic material ready for application. It creates a dense and very strong surface, can be applied in one layer up to 5 mm.
Are there only small nuances? Well, it is enough to apply a thin layer of material. Finish putty by TRIORA can be applied with the thickness of layer up to 1 mm. It creates a flat, snow-white surface. It is better to use this material for those walls that you just need to improve before further work.
What to do if something inthe middle is needed? The universal putty by TRIORA is suitable. You can buy it online on www.triora.ua. This material can be applied with thickness of a layer up to 3 mm and is suitable for walls with small flaws.
- The functions of the room and its atmosphere.
Rooms can be:
- warm and dry;
- unheated and moist;
- warm, but with high humidity, for example – bathrooms.
What to choose?
The universal and finish putty by TRIORA are suitable for dry living rooms
In wet, poorly heated rooms, it is better to use the facade putty by TRIORA. It protects walls against moisture penetration well, and prevents possible mold.
Four errors when working with putty
What is the difference between all these types of putty? It is still the bottom layer. So many people think like that, choosing the most affordable putties. Why it is not allowed thing to do and what consequences of the improper selection of the material are exist?
Error 1. Finish putty using for the main works. Any putty, which is applied with a thickness of layer up to 1 mm, can be cracked simply if you apply it with the thickness of layer more than 1 mm.
Error 2. Facade putty using for the final layer. It is difficult to stretch this material on the wall with a thin even layer. It turns out a more coarse structure.
Error 3. Unsuitable material for wet rooms. The usual putty in damp areas does not protect the wall from moisture. It is better to use moisture resistant putty.
Error 4. Instruction is not needed. Even if you are an experienced repairperson, do not neglect the manufacturer’s instructions. Each material has its own peculiarity of using. It is better to read what the manufacturer of the material recommends carefully, than to try to find the truth after an unsuccessful repair.
Messed up job is the result of each of these errors. If the layer of putty is of poor quality, it ruins the appearance of all subsequent coatings. It does not matter what you use – paint or wallpaper, the shortcomings will be visible clearly.
Find your ideal putty by TRIORA for each wall. This would be the basis of quality repairs.
